Sunday, 2 October 2011

1:1 Model Detail

For my final 1:1 model, I decided to focus on the structure of the spiral and how it connects and joins to the floor of the office. I decided to go with steel piping as it is very strong and is able to bend, thus creating a spiral. The steel piping spiral is in a latticework formation that will provide strength as a singular spiral will not be structurally sound.







The detail contains two steel pipes either side of the main structural beam, this helps support the building and floor. The steel lattice also goes through the floor extending to the roof, which I think adds an effect when inside the office as you can see the structural latticework. The angle of the pipes indicate the top of the spiral, as it extends through the floor, each spiral, 5 in total is bolted to a beam in this manner.

Model work 1:5

After talking to Dermit and Padma, and presenting my drawings, they seemed to like the idea of the natural looking supports of the Toyo Ito building and the spiral structural scheme I drew at my site. Due to this I modelled a interesting way that incorporated the spiral scheme, this structural support lifted the building or office of the ground to produce the office to be lifted significantly of the ground. While there is a sense of floating of the building, I wanted to illustrate the strength and scale of the structure so produced large columns that were supported by the spiral, while still trying to incorporate Toyo Ito's idea of a natural support.


Doodling...




As I developed this model further I realised that the spiral became more of a decoration than a main structural aspect, on the 1:1 model I should further develop and focus more on the spiral, exaggerating it.

Gathering continued

After producing three augmented drawings that related to our matrix building, we were asked to then personalize a site with a few ideas that included our original starting points. My starting points were Regan's ideas of isolation and the sense of a spiral, I also include ideas from my matrix building that I pulled out in my earlier drawings. The task was to design an office that included the views of 5other people or 'friends', thus needed a function to the office. These drawings were initial sites, and initial idea work that developed from my starting points.


Wednesday, 24 August 2011

Week 6&7: 'Gathering'

Augmented Drawings was week 6's tasks, producing firstly 3 augmented drawings of our precedent buildings (given matrix). Our task was to come up with ideas from the building we were studying and draw abstract or simple drawings that mould with the picture to create a somewhat 'augumented reality'. I came to the conclusion on the Sendai Mediatheque building, produced by Toyo Ito, that the main structural elements were based or schemed of natural supports (e.g Trees). From this I produced work that showed how trees could support or grow from the building.






The last image, instead of showing a meaning behind the drawing, I decided to show the structural aspects within the building and the joints of different materials that exist. What i find interesting about this drawing is the amount of layering of different materials that he has used.

Peer Reviews: Project 2 'Sustenance'

After being crited myself on my second life project, i found that my critics gave me compliments on the process i took to get to my idea and the research I put into the project from the start. They also agreed on the 'growing' of the building from its surroundings by coming out of other buildings on second life. After this I was set to crit others in the Argumentative Drawing group.


Jianxiang Ma (Mickey)
www.1337monkeyz.blogspot.com
Mickey's project I found was very good, he had a good starting idea and it showed with his final outcome that he had put alot of effort into his 1:1 detail model. Mickey's idea was had a very abstract meaning, but here we go, it was the idea that in the future oxygen would be a very scarce material, where humans would have to be walking around with oxygen masks on, filling up on what he called Oxygen stations which are similar to petrol stations. His idea from this was to design a sustainable, oxygen providing walkway that could replenish oxygen. In his walkway he had alot of plantations sitting upon a curved rail, to increase surface area. While gaining the idea of lungs he created a facade that covered the plants with an almost vein/branches from a tree design. As explaining can do so much, a picture here would be genius!

Jinok Shin
www.jinogi.tumblr.com
Jinok's project I found again interesting, her idea was communication or a lack of socialisation between interiors and exteriors. Her project, thus was to create a table both interior and exterior that could be used greatly for socialising. Her idea was to create an extendable table the fitted through the outside wall, it could extend to manage more people and have inside the table compartments for files, objects etc for storage. Her 1:5 scale model was amazing, with fully working hinges, rollers and the table could extend in four directions. She explained extending the table in different ways allowed the user to experience different social aspects (e.g being extremely close and far from people on table).

Jack Tiong
www.architekturvoyage.blogspot.com
Jack's idea was to create a case for his bible, a sign of devotion and care. He gained his inspiration from the holy wings inside churches and other holy matters. I thought his project was very complete, as he had done alot of research, alot of concept drawings, alot of modelling to provide final model and a very smart looking final model. The case which he made represents wings or hands wrapping the bible, and being held shut by magnets i thought was a smart idea. Once pulled apart the hands or wings show the bible sitting upon a case in the middle.




------------------------------------------------

Tuesday, 16 August 2011

Changing from its Surroundings

After a productive talk with Ian, I've decided to texture the building similar to its surroundings so that it portrays the idea of how the surroundings has affected the growth or strength of the building, and in my head how the environment has helped the idea of evolution. This also helps show the stages in which the user experiences when walking through, almost like the stages of evolution, growing mentally and physically in strength. The end point or the most strength shown physically and mentally is a room with a window portraying a great visual experience when looking up. This texture should be something man made, maybe industrialized showing mental strength.

-----------------------------------------------------

End Room, 'Looking Up'

Different Textures depending on Surroundings